Installation guide

Decorator Keypads Crestron C2N-DB6, C2N-DB8 & C2N-DB12
Programs and Firmware
Program or firmware files may be distributed from programmers to
installers or from Crestron to dealers. Firmware upgrades are available
from the Crestron website as new features are developed after product
releases. Options are available to upload programs via the programming
software or to upload and upgrade via the Crestron Toolbox. For details
on uploading and upgrading, refer to the Crestron Studio help file, the
SIMPL Windows help file, or the Crestron Toolbox help file.
Crestron
Studio or
SIMPL
Windows
If a Crestron Studio (or SIMPL Windows program) is provided, it can be
uploaded to the control system using Crestron Studio (or SIMPL
Windows) or Crestron Toolbox.
Firmware
Check the Crestron website to find the latest firmware. (New users must
register to obtain access to certain areas of the site, including the FTP
site.)
Upgrade C2N-DB6/8/12 firmware via Crestron Toolbox.
• Establish indirect communications with the C2N-DB6/8/12 keypad
and display the “System Info” window.
• Select Functions | Firmware… to upgrade the C2N-DB6/8/12
firmware.
NOTE: During firmware loads, all LEDs blink at a slow rate.
Program Checks
Using Crestron Toolbox, display the network device tree (Tools |
Network Device Tree View) to show all network devices connected to
the control system. Right-click on the C2N-DB6/8/12 to display actions
that can be performed on the C2N-DB6/8/12.
14 • Decorator Keypads: C2N-DB6/8/12 Operations & Installation Guide - DOC. 6154C