Installation guide

Decorator Keypads Crestron C2N-DB6, C2N-DB8 & C2N-DB12
CAUTION: Excess wire pinched between the keypad and
electrical box could short out. Make sure that all excess wire is
completely inside the electrical box and not between the box and
the side of the keypad.
4. Using the screwdriver, attach the keypad using the supplied 1-inch
pan head screws.
5. Attach the faceplate (sold separately).
6. Turn control network power ON.
Installation View (Single-Gang Electrical Box Shown)
6-31 x 1 inch Pan Head
2.4 in Depth Recommended
10 • Decorator Keypads: C2N-DB6/8/12 Operations & Installation Guide - DOC. 6154C