Installation guide

Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads
Operations & Installation Guide - DOC. 6603D Cameo Keypads • 3
Customizable Buttons
Exquisitely simple yet highly customizable, a single Cameo keypad can
be configured easily by the installer to provide an array of buttons. Each
keypad is actually furnished with an assortment of engravable blank
button caps in three different sizes to support a variety of physical
layouts. Their smoothly rounded shape and refined pushbutton action
give each button press a positive feel with subtle surface relief for an
excellent tactile response. Through programming, each button can be
configured to support up to three separate functions simply by tapping,
double-tapping, or holding the button. “Shift key” functionality is even
possible, allowing one button to be held while pressing another.
Auto-Dimming Backlight
Cameo’s new high-quality backlit laser engraving provides customizable
button text that is easy to read under any lighting condition. A built-in
light sensor can control the backlight intensity automatically to achieve a
crisp, legible appearance in both darkened and fully lit rooms.
Enhanced LED Feedback
Six pinhead-sized white LED light pipes provide very elegant and
versatile button feedback. Ten different built-in blink patterns enable all
kinds of blinking LED feedback while simplifying programming and
minimizing traffic on the Cresnet network. Built-in bargraph logic allows
the feedback LEDs to function as a 6-segment bargraph display to
provide a visible level indication when adjusting lighting and audio
settings. The overall LED intensity is auto-dimmable, adjusting
automatically for optimal visibility under varying lighting conditions.
Contact-Closure Inputs
Two sensing inputs are included on the rear of the keypad to provide a
simple and convenient interface for low-voltage contact-closure devices
such as occupancy sensors, door switches, and motion detectors.
Ambient Light Sensor
In addition to controlling Cameo’s backlight and LED intensity, the built-
in light sensor can also be utilized by the control system to support
daylight harvesting and other programmable functions. Refer to
“Ambient Light Sensor Operation” on page 25 for more details.