Installation guide

Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T
20 • Cameo Keypads Operations & Installation Guide - DOC. 6603D
Programming is organized into six system Views of the lighting system,
each providing a moveable toolbox of devices such as interfaces, fixtures
and control modules. You can add a device to your system simply by
selecting it from one of the toolboxes and dragging it to a room. The
available toolboxes differ depending on the View but all Views include a
"General" toolbox that allows you to add areas and rooms at any time.
Programming with SIMPL Windows
NOTE: While SIMPL Windows can be used to program the
Cameo Series keypads, it is recommended to use SystemBuilder for
configuring a system.
SIMPL Windows is Crestron’s premier software for programming
Crestron control systems. It is organized into two separate but equally
important “Managers”.
Configuration
Manager
Configuration Manager is the view where programmers “build” a
Crestron control system by selecting hardware from the Device Library.
• To incorporate the Cameo keypad into the system, drag the
C2N-CB-TS icon, which includes all models, from the Wired
Keypads folder of the Device Library and drop it in System Views.
Locating the Cameo keypad in the Device Library
• The system tree of the control system displays the device in the
appropriate slot with a default Net ID as shown in the following
illustration.