Installation guide

Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T
18 • Cameo Keypads Operations & Installation Guide - DOC. 6603D
CAUTION: Excess wire pinched between the keypad and electrical box
could short out. Make sure that all excess wire is completely inside the
electrical box and not between the box and the keypad.
4. Make sure the keypad is oriented properly, place it in the
electrical box, and attach using the supplied 7/8 in. pan head
screws.
5. Attach the desired decorator style faceplate (not supplied).
6. Turn the Cresnet system power ON.