Installation guide

Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T
6 • Cameo Keypads Operations & Installation Guide - DOC. 6603D
Physical Description
This section provides information on the connections, controls and
indicators available on your Cameo keypads.
Cameo Keypad Physical View – Flush Mount
The illustration above shows the flush mount model with two triple-row
button caps.
Button caps are laser-engravable designed with the Crestron Engraver
software. The engraving software provides a single line of up to 10
characters, including spaces, for single-button caps, and two lines of
characters on double and triple-button caps. The Crestron Engraver
software, Version 3.09.00 or later, is available from the Crestron website.
(Requires Crestron Database software, Version 19.0.4 or later.)
NOTE: A single button cannot be installed in the lowest position of the
keypad.
The illustrations on page 7 and 8 provide overall dimensions and a view
of the rear housing assembly of each model.