Specifications

Crestron DGE-2 Digital Graphics Engine
Locating the DGE-2 (Cresnet) in the Device Library
b. To incorporate the DGE-2 (Ethernet) into the system, drag the DGE-2
from the Touchpanels | Touchpanels (Ethernet) folder of the Device
Library and drop it in the System Views.
Locating the DGE-2 (Ethernet) in the Device Library
The system tree of the control system displays the device in the appropriate
slot(s) with a default Net ID or IP ID as shown in the following illustration.
NOTE: In the following illustration, there is both an Ethernet device in
Slot 8 and a Cresnet device in Slot 9. It is possible to have both types of
device attached to a control system as long as the control system has either
a built-in or expansion Ethernet interface.
Operations Guide – DOC. 6809E Digital Graphics Engine with DigitalMedia™ CAT Connectivity: DGE-2 • 51