Specifications

Crestron DGE-2 Digital Graphics Engine
Screen Brightness Details
NOTE: Screen Brightness is not displayed unless there is a V-Panel connected
directly to the DGE-2 DM OUT ports.
The Screen Brightness can be varied from 0 to 100. To increase the brightness, touch
Up. To decrease the brightness, touch Down.
Hard Button Feedback Details
NOTE: Hard Button Feedback is not displayed unless there is a V-Panel connected
directly to the DGE-2 DM OUT ports.
The Hard Button Feedback section of the setup menu provides visual feedback for a
hard button press. Pressing a the hard button results in the icon on the screen
illuminating in bright green.
Touch Path
NOTE: Touch Path is not displayed unless there is a V-Panel connected directly to
the DGE-2 DM OUT ports.
The Touch Path indicators show whether is data from the V-Panel is sent to the
DGE-2 via the DM connection (“Touch Over DM”) or via the LAN connection
(“Touch Over IP”).
Save & Reboot and Shutdown Details
To save any changes and reboot the touch screen, touch Save & Reboot, located in
the lower right section of the setup menu.
To turn off the touch screen, touch Shut Down, located in lower right section of the
setup menu. This is the recommended method for shutting down the touch screen.
After the touch screen has shut down, the power supply can be safely removed from
the touch screen.
Exit Details
Touch Exit to leave the setup menu and return to the project. If no project has been
loaded, the touch screen displays an error message and return to the setup menu.
Operations Guide – DOC. 6809E Digital Graphics Engine with DigitalMedia™ CAT Connectivity: DGE-2 • 45