Specifications

Digital Graphics Engine Crestron DGE-2
NOTE: When configuring an adapter, only one item can be modified at a time. For
example, to modify an IP address and also change authentication, touch Configure
and modify the IP address, then touch OK (to return to the “Ethernet Setup”
window). Touch Configure again, change authentication, then touch OK. The order
in which modifications are performed does not matter.
“Local Area Connection Properties” Window
To establish dynamic or static processing, select Internet Protocol (TCP/IP) and
touch Properties.
“Internet Protocol (TCP/IP) Properties” Window
Transmission Control Protocol/Internet Protocol (TCP/IP) is a set of protocols that
defines how to transfer data between two computers. TCP monitors and ensures
38 • Digital Graphics Engine with DigitalMedia™ CAT Connectivity: DGE-2 Operations Guide – DOC. 6809E