Specifications

Digital Graphics Engine Crestron DGE-2
“Video Setup” Window (HDMI 1 Tab)
HDMI video is setup using the Position, Size, Overscan and Color controls (for
Brightness, Contrast, Red, Green and Blue). Up to 30 presets may be stored for
future retrieval.
NOTE: Depending on HDMI source, when the video position and/or size is
adjusted beyond a certain value, the video display is black. Reversing the setting
restores the video.
NOTE: HDMI audio is heard only if the accompanying video source is locked.
Overscan is the active image area in a video picture that is outside the edges of the
display device. Overscan adjustment first came about because of noise and other
artifacts at the beginning and end of the scan lines. To reliably eliminate the noise
and fill the screen with a picture, the outside edge of the active picture area was
pushed out past the edge of the display area. The average or targeted overscan loss is
about 5 to 10% of the image on each edge. Digital images have nearly eliminated the
noise and other artifacts at the edge of the picture, so more of the video image can be
safely shown. The Normal setting is usually the correct choice for most video inputs.
30 • Digital Graphics Engine with DigitalMedia™ CAT Connectivity: DGE-2 Operations Guide – DOC. 6809E