Specifications

Digital Graphics Engine Crestron DGE-2
NOTE: Select Exit Setup Mode to exit the setup menu.
DGE-2/V-Panel Setup Menu
The setup menu provides access to all basic functions and parameters. It is divided
into Setup, Ethernet, LAN Ethernet Status, Standby, Misc. Controls, VPanel Ethernet
Status, Screen Brightness, Hard Button Feedback and Touch Path sections. There
are also buttons for Save & Reboot, Shut Down and Exit.
NOTE: VPanel Ethernet Status, Screen Brightness, Hard Button Feedback and
Touch Path are displayed unless there is a V-Panel connected directly to the DGE-2
DM OUT ports.
NOTE: To allow the touch screen to upload projects, standby is disabled until
approximately five minutes after the project is loaded.
To exit the setup menu and return to the program, touch Exit, located at the bottom
of the setup menu. To save any changes and reboot the touch screen, touch Save &
Reboot, located at the bottom of the setup menu. Use the Shut Down button to turn
off the touch screen.
Setup Menu Details
The setup menu allows configuration of the touch screen’s settings for security,
Cresnet ID, touch screen calibration, runtime project, video, audio, embedded
applications and diagnostics. The setup menu also has a button that toggles the
on-screen keyboard on and off.
20 • Digital Graphics Engine with DigitalMedia™ CAT Connectivity: DGE-2 Operations Guide – DOC. 6809E