Specifications

Crestron DGE-2 Digital Graphics Engine
5. For DigitalMedia CAT wiring, use DM-CBL DigitalMedia cable. Maximum cable length is 450 feet
(137 meters). Up to two DM Repeaters (model DM-DR) may be required. All cable and repeaters sold
separately. Refer to the Crestron DigitalMedia Design Guide (Doc. 4546) for DM system design
guidelines.
6. DMNet wiring is not compatible with Cresnet wiring. DMNet wiring cannot be daisy chained.
7. Refer to the following table for the 24 A B G connector pinouts.
24 A B G Port
24
GAB
PIN # SIGNAL DESCRIPTION WIRE COLOR
24 24V DC DC Power Red
A DMNet+ DMNet White
B DMNet- DMNet Blue
G Ground DC Ground Black
8. If a DM Switcher or other DM device supplying power is connected to the DGE-2, the wire to the 24
pin between the DM device and the DGE-2 must be disconnected. The wires to the A, B and G pins
must remain connected.
Operations Guide – DOC. 6809E Digital Graphics Engine with DigitalMedia™ CAT Connectivity: DGE-2 • 17