Specifications

Digital Graphics Engine Crestron DGE-2
5. Intercom is only supported using a V-Panel model V12 or V15. For IP Intercom, the V-Panel must
connect directly to the DGE-2 via DM CAT with no repeaters or switchers in line.
6. The latest software versions can be obtained from the Crestron Web site. Refer to the NOTE
following these footnotes.
7. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
8. Required for use with V24R-C displays.
9. Requires a DM-TX-201-C or equivalent (sold separately).
NOTE: Crestron software and any files on the Web site are for authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIPs) only. New users
must register to obtain access to certain areas of the site (including the FTP site).
Physical Description
This section provides information on the connections, controls and indicators
available on the DGE-2.
DGE-2 Physical View (Front View)
DGE-2 Physical View (Rear View)
12 • Digital Graphics Engine with DigitalMedia™ CAT Connectivity: DGE-2 Operations Guide – DOC. 6809E