Specifications

DMPS-200-C DigitalMedia
Presentation System 200
crestron.com
|
800.237.2041
DM OUTPUT 2 PoDM (rear): (1) green LED, indicates downstream device
is drawing power over DM
LAN (rear): (2) LEDs, bi-color LED (left) indicates Ethernet speed and
activity, green LED (right) indicates Ethernet link status
Power Requirements
Main Power: 4 Amps @ 100-240 Volts AC, 50/60 Hz
Available Cresnet Power: 30 Watts
Power over DM (PoDM): PoDM PSE (Power Sourcing Equipment), supplies
power to PoDM Powered Devices
[3]
Power over HDBaseT (PoH): PoH PSE (Power Sourcing Equipment),
supplies power to PoH Powered Devices
[3]
PoDM Power Pack: 1.875 Amp @ 48 Volts (100-240 Volts AC, 50/60 Hz
power pack, model PW-4818DU sold separately)
Environmental
Temperature: 41° to 104°F (5° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 277 BTU/hr
Enclosure
Chassis: Metal, black finish, fan-cooled, vented sides
Faceplate: Metal, black finish with polycarbonate label overlay
Mounting: Freestanding or 3U 19-inch rack-mountable (adhesive feet and
rack ears included)
Dimensions
Height: 5.20 in (133 mm) without feet
Width: 17.28 in (439 mm);
19.00 in (483 mm) with rack ears
Depth: 16.31 in (415 mm)
Weight
16.4 lb (7.5 kg)
MODELS & ACCESSORIES
Available Models
DMPS-200-C: DigitalMedia
Presentation System 200
Available Accessories
PW-4818DU: 48V Power Pack for PoDM
DM-TX-200-C-2G: Wall Plate DigitalMedia 8G+
Transmitter 200
DM-TX-201-C: DigitalMedia 8G+
Transmitter 201
DM-TX-401-C: DigitalMedia 8G+
Transmitter 401
HD-SCALER: High-Definition Video Scaler
DM-RMC-SCALER-C: DigitalMedia 8G+
Receiver & Room Controller
w/Scaler
DM-RMC-100-C: DigitalMedia 8G+
Receiver & Room Controller 100
DM-RMC-200-C: DigitalMedia 8G+
Receiver & Room Controller 200
AMP-2210S: 2x210W Commercial Power Amplifier, 4/8Ω
AMP-3210S: 3x210W Commercial Power Amplifier, 4/8Ω
AMP-2210T: 2x210W Commercial Power Amplifier, 4/8Ω or 70/100V
AMP-3210T: 3x210W Commercial Power Amplifier, 4/8Ω or 70/100V
AMP-2210HT: 2x210W Commercial Power Amplifier, 4/8Ω or
High-Power 70V
CNSP-XX: Custom Serial Interface Cable
IRP2: IR Emitter Probe w/Terminal Block Connector
CNXRMIRD: IR Receiver
DM-CBL-8G-NP: DigitalMedia 8G
Cable, non-plenum
DM-CBL-8G-P: DigitalMedia 8G
Cable, plenum
DM-8G-CONN-100: DigitalMedia 8G
Cable Connector, 100-Pack
DM-8G-CRIMP: Crimping Tool for DM-8G-CONN
CRESNET-NP: Cresnet
®
Control Cable, non-plenum
CRESNET-P: Cresnet
®
Control Cable, plenum
CRESNET-HP-NP: Cresnet
®
“High-Power” Control Cable, non-plenum
CBL Series: Crestron
®
Certified Interface Cables
MP-WP Series: Media Presentation Wall Plates
MPI-WP Series: Media Presentation Wall Plates - International Version
Notes:
1. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort
Multimode signal. CBL-HD-DVI interface cables available separately.
2. For DM 8G+ wiring, use Crestron DM-CBL-8G DigitalMedia 8G Cable, Crestron DM-CBL
DigitalMedia Cable, Crestron DM-CBL-D DigitalMedia D Cable, or generic CAT5e (or better)
UTP or STP. Maximum wire length for DM 8G+ is 330 ft (100 m) between devices. Shielded
cable and connectors are recommended to safeguard against unpredictable environmental
electrical noise which may impact performance at resolutions above 1080p. Refer to the
Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines.
DM 8G+ is also compatible with HDBaseT Alliance specifications for connecting to HDBaseT
compliant equipment. All wire and cables sold separately.
3. Supplying Power over DM (PoDM) or Power over HDBaseT (PoH) requires external power pack,
model PW-4818DU, sold separately.
4. Item(s) sold separately.
5. The RGB inputs can accept component, composite, and S-Video signals via direct interface
to Crestron MPS Series products, or through an appropriate adapter (not included). Input sync
detection is not provided for composite or S-Video signal types through the RGB connection.
6. Deep Color and 3D video signals are only supported via HDMI inputs 1 and 2, and DM input 6.
7. When a digital audio input (HDMI, DM, or SPDIF) is routed to an HDMI or DM output, that
output is put in “pass-through” mode so that the digital input is the only signal that passes to
that output and the audio controls on that output have no effect.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at www.crestron.com/salesreps or by calling 800-237-2041.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Crestron, the Crestron logo, Auto-Locking, Core 3 UI, Cresnet, Crestron Fusion, Crestron Mobile,
Crestron Toolbox, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G+, e-Control,
Fusion RV, QuickSwitch HD, and RoomView are either trademarks or registered trademarks of
Crestron Electronics, Inc. in the United States and/or other countries. iPad and iPhone are either
trademarks or registered trademarks of Apple Inc. in the United States and/or other countries.
Dolby and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in
the United States and/or other countries. DTS is either a trademark or registered trademark of
DTS, Inc. in the United States and/or other countries. Android is either a trademark or registered
trademark of Google Inc. in the United States and/or other countries. HDBaseT, 5Play, and the
HDBaseT Alliance logo are either trademarks or registered trademarks of the HDBaseT Alliance
in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or
registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other
trademarks, registered trademarks, and trade names may be used in this document to refer
to either the entities claiming the marks and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others. Crestron is not responsible for errors in
typography or photography. Specifications are subject to change without notice.
©2013 Crestron Electronics, Inc.