Specifications

Audio Server Crestron Adagio
®
AAS-1/2/4
10 • Audio Server: Adagio
®
AAS-1/2/4 Operations Guide – DOC. 6465B
Setup
Network Wiring
Unlike other Crestron network devices, the AAS does not use Cresnet

for
communications between the device and the control system. The AAS requires the
use of a high-speed Ethernet connection for control system communications.
For information on connecting Ethernet devices in a Crestron system, refer to the
latest version of the Crestron e-Control

Reference Guide (Doc. 6052), which is
available for download from the Crestron website (www.crestron.com/manuals
).
Installation
CAUTION: The AAS cannot be mounted at an angle. Damage to the internal hard
drive and CD player may result. The unit must be installed on a level, vibration-free
surface.
Hardware Hookup
Ventilation
The AAS should be used in a well-ventilated area. The venting holes should not be
obstructed under any circumstances.
To prevent overheating, do not operate this product in an area that exceeds the
environmental temperature range listed in the table of specifications. Consideration
must be given if installed in an enclosed assembly since the operating ambient
temperature of that environment may be greater than the room ambient. Contact with
thermal insulating materials should be avoided on all sides of the unit.
Connect the Device
Make the necessary connections as called out in the illustration that follows this
paragraph. Apply power after all connections have been made.
Hardware Connections for the AAS
LAN:
FOR NETWORK
CONNECTION
OPTIONAL
RGBHV OUT:
FOR VIDEO
DISPLAY
OPTIONAL VIDEO OUT:
FOR VIDEO DISPLAY
DIGITAL AUDIO:
OPTIONAL TO
DIGITAL DEVICES
AND MEDIA
ANALOG AUDIO OUT:
AUDIO OUTPUTS FOR
UP TO FOUR AREAS
POWER:
100VAC - 240VAC