Installation guide

Crestron C2N-FTB FlipTop Control Center with Cresnet
®
FlipTop Control Center
with Cresnet
®
: C2N-FTB
Introduction
Features and Functions
The C2N-FTB-B and the C2N-FTB-BALUM are Crestron
®
keypad devices that
provide a stylish flush-mount tabletop interface and control solution. The fliptop
compartment provides organized storage for a variety of pullout computer,
communication, and A/V cables, which stow neatly out of sight within the
fliptop compartment when not in use. The keypad provides A/V, lighting, and
other functional controls via Cresnet
®
.
The suffix ‘-B’, and ‘-BALUM’, respectively denotes color, e.g., C2N-FTB-B is
a black unit, and C2N-FTB-BALUM has a brushed aluminum finish. For
simplicity within this guide, color suffix is omitted and the designation
C2N-FTB is used except where noted.
Functional Summary
• Built-in engravable* keypad with 10 to 20 buttons with LEDs
• One AC power passthrough connector
• Two Cresnet ports (on the bottom side)
• Cable support plate (included)
* As an option, custom-engraved buttons can be designed and obtained by using the
Crestron Engraver software. They are available from the Crestron website.
Operations & Installation Guide – DOC. 6338 FlipTop Control Center with Cresnet
®
: C2N-FTB • 1