User Guide

Crestron 1700C-BEZEL Bezel Kit
NOTE: The pushbuttons usually fit snugly on the membrane switch
actuators. Therefore the two items may be removed as one piece.
NOTE: Some touchpanels may have adhesive holding the membrane
switch actuators to the PCB. For these units, peel back the actuators. If
there is any residual adhesive on the PCB, wipe it away with a clean soft
cloth slightly dampened with isopropyl alcohol.
Exploded View – Disassembly of Touchpanel
Bezel
Pushbuttons
& Membrane
Switch Actuator
PCB Surface
Pushbuttons
& Membrane
Switch Actuator
5. As shown in the illustration on the next page, position the new
bezel (without pushbutton cutouts) over the exposed
touchpanel.
Operations & Installation Guide - DOC. 6252 Bezel Kit: 1700C-BEZEL • 3