User's Manual

Crestron MLX-3 infiNET EX™ LCD Handheld Remote
“BASIC SETUP” Screen
BASIC SETUP
PAGE 1/1
VERSION INFO
CONTRAST
DISPLAY T/O
LIGHT T/O
DEVICE” screen. Press HOME twice to exit the Setup mode so Toolbox
can recognize the device being acquired to the gateway.
 If the MLX-3 is already acquired to another network, when you press h to
add it to this new network, a screen message instructs you to perform a
factory reset in order to acquire it to the new network. Refer to “Factory
Reset Procedure” on page 11.
 If the acquire process is not successful, the screen displays the following
message for approximately five seconds: “The node addition failed. Try
again or reference the manual for more assistance. Press h to continue.”
Refer to “Troubleshooting” on page 19.
 If you press h in time, the display returns to the “PROGRAM DEVICE”
screen. Otherwise, the display returns to the startup screen.
BASIC SETUP Functions
From the “PROGRAM DEVICE” screen, select BASIC SETUP. The “BASIC
SETUP” screen, shown to the left, allows you to select and review the version
information of the software and firmware programs currently loaded on the MLX-3
remote, and to review/adjust the contrast, display timeout, and backlight timeout
settings.
Version Info
From the “BASIC SETUP” screen, select VERSION INFO. The “Version Info”
screen displays the version numbers of the software and firmware programs
currently loaded on the MLX-3 remote.
Version Info
Bootloader Ver:
3.0.0.3
Application Ver:
3.1.1.11
RF Firmware Ver:
3201
Setup File Ver:
0.0.2.1
Press > to
continue.
PAGE 1/1
Follow the instruction to press the h key to continue. The display returns to the
“BASIC SETUP” screen, permitting you to set the screen contrast, display timeout,
and backlight timeout levels, described in the following paragraphs.
Contrast Setup
Screen Contrast
From the “BASIC SETUP” screen, press one of the menu buttons on either side of the
CONTRAST menu option to select the screen contrast function.
Operations Guide – DOC. 7134 infiNET EX™ LCD Handheld Remote: MLX-3 • 7