User Manual

Crestron HTT-B10EX infiNET EX TableTop Controller
Operations Guide – DOC. 6995 infiNET EX TableTop Controller: HTT-B10EX • 13
Uploading and Upgrading
Crestron recommends using the latest programming software and that each device
contains the latest firmware to take advantage of the most recently released features.
However, before attempting to upload or upgrade it is necessary to establish
communication. Once communication has been established, files (for example,
programs or firmware) can be transferred to the control system (or device). Finally,
program checks can be performed (such as changing the device ID or creating an IP
table) to ensure proper functioning.
NOTE: Crestron software and any files on the Web site are for authorized Crestron
dealers and Crestron Service Providers (CSPs) only. New users must register to
obtain access to certain areas of the site (including the FTP site).
Establishing Communication
Use Crestron Toolbox for communicating with the HTT-B10EX; refer to the
Crestron Toolbox help file for details. There is a single method of communication:
indirect.
Indirect Communication
PC Running
Crestron Toolbox
Control
System
infiNET EX
Gateway
PWR
NET
AC TIV ITY
ACQUIRE
SETUP
CEN-RFGW-EX
LAN P oE
2W
NET
G Z Y 24
CRESTRON
LAN
Serial,
or USB
LAN
HTT-B10EX
CRESTRON
CRESTRON
HTT-B10EX connects to the gateway, which connects to control system via
Ethernet.
An Address Book entry must be defined for the gateway. For information, refer to
the Toolbox help file.