User Manual

Crestron HTT-B10EX infiNET EX TableTop Controller
Operations Guide – DOC. 6995 infiNET EX TableTop Controller: HTT-B10EX • 11
Leaving an infiNET EX Network
To leave a network, simply place the INET-CBDEX into Acquire mode (step 2
above) when there is no gateway in Acquire mode.
Verifying Communications Status
To check the communication status of the device, tap either the left or right top
button three times then press and hold it down (tap-tap-tap-press+hold) for less than
2 seconds. The top LED indicates the communication status. Refer to the following
table for details.
LED Status Table
LED
DISPLAY
(Top LED)
COMMUNICATIONS STATUS
Turns on for
5 seconds
Device communicating with gateway and control system.
Blinks three
times
Device communicating with gateway, but gateway not
communicating with control system.
Blinks twice Device is acquired but not communicating with gateway.
Blinks once Device not acquired to a gateway.