User Manual

Two-Way RF Transceiver Module Crestron CWD7191
4  Two-Way RF Transceiver Module: CWD7191 Operations Guide - DOC. 7439C
Physical Description – CWD7191 with a Dipole Antenna
The module, shown below, consists of various components attached to a printed circuit board. A SMA
reverse polarity female antenna port is located at the edge of the circuit board for the attaching of a
dipole antenna while a 5-pin double row male connector is for the application-specific installation.
Physical View of CWD7191 (Dipole Antenna)
CWD7191 Detail Views
SIDE BACK
P
C
B
RF SHIELD
SMA PLUG REVERSE
POLARITY CONNECTOR
RF SHIELD
1.5" X 1.0" X 0.24"
2.50 inch
6.35 cm
inch
5.08 cm
0.40 inch
1.02 cm
PIN 1
PIN 10
PIN 9
PIN 2
RF SHIELD
P2
HEADER, 5PIN, DBL ROW
0.050" X 0.05"LS, RT ANGLE, SM
2.00