User Manual

Two-Way RF Transceiver Module Crestron CWD7083
2  Two-Way RF Transceiver Module with Integral Antenna: CWD7041 Operations Guide - DOC. 7263A
Specifications
The table below is a summary of specifications for the CWD7083.
Specifications of the CWD7083
SPECIFICATION DETAILS
Power Requirements 0.825 Watts (5VDC @ 0.167A)
Operating Frequency 2400 MHz to 2483.5 MHz (802.15.4 compliant)
Operating Ranges*
Minimum Distance
Maximum Distance Indoors
(without repeater device)
3 ft
100 ft
Available Channels 16 (numbered 11 through 26 per 802.15.4)
Antenna Chip
Dimensions Width: 1.88 in (4.77 cm)
Height: 0.82 in (2.08 cm)
Depth: 0.10 in (0.25 cm)
* The location and orientation of the module are important factors in the RF performance. With the unit located outside
of any metal enclosures, the antenna is adjusted to achieve the best range. The range is dependent on its placement and
the building in which it is used. The construction of the building, obstructions, and RF interference from other devices
are factors determining the effective range of the unit. To prevent unit-to-unit RF interference, multiple modules
operating at the same frequencies should not be installed within 3-5 feet of each other.
Physical Description
The module, shown below, consists of various components attached to a printed circuit board.
Physical View of CWD7083