User Manual

Crestron CWD6782 Two-Way RF Transceiver Module
Operations Guide - DOC. 7069A Two-Way RF Transceiver Module: CWD6782 • 5
Physical Description – CWD6782 with a Dipole Antenna
The module, shown below, consists of various components attached to a printed circuit board. A SMA
reverse polarity female antenna port is located at the edge of the circuit board for the attaching of a
dipole antenna while a 5-pin Double Row Male connector is for the application-specific installation.
Physical View of CWD6782 (Dipole antenna)
CWD6782 Detail Views
SIDE BACK
P
C
B
RF SHIELD
SMA PLUG REVERSE
POLARITY CONNECTOR
RF SHIELD
1.5" X 1.0" X 0.24"
2.50 inch
6.35 cm
1.80 inch
4.572 cm
0.40 inch
1.016 cm
PIN 1
PIN 10
PIN 9
PIN 2
RF SHIELD
P2
HEADER, 5PIN, DBL ROW
0.050" X 0.05"LS, RT ANGLE, SM
Ports
The module contains a 5-pin Double Row Male Connector, a 10-pin debug header, and one antenna
port.
Refer to the diagrams and descriptions that follow.