User's Manual

Crestron CWD6671 Two-Way RF Transceiver Module
Setup
Hardware Hookup
Refer to the hookup diagram below, which shows the connections made to the
module. Complete the connections in any order.
NOTE: To prevent unit-to-unit RF interference, multiple modules operating at the
same frequencies should not be installed within three to five feet of each other.
Hookup Connections for CWD6671
PIN 2 PIN 1
PIN 16
PIN 15
For more information on these connectors, refer to “Ports” on page 3.
Operations Guide - DOC. 6834 Two-Way RF Transceiver Module: CWD6671 • 7