User Manual

infiNET™ Thermostat Crestron CHV-TSTATRF
Operation
Setup Mode
After the CHV-TSTATRF is installed, it is necessary to set it up for a particular
heating/cooling system. The choices available on the Setup screens depend on the
type of system selected.
Place the CHV-TSTATRF in the SETUP mode by doing the following:
1. Press and hold the FAN button.
2. While the FAN button is being held, press and hold the RAISE and
LOWER buttons simultaneously.
3. Hold all three buttons for five seconds, after which the unit will enter
SETUP mode.
Once in SETUP mode, the display will indicate the currently selected “Setup
Parameter/Function”. Press and release the MODE button quickly (must be released
within one second) to change to the next Parameter/Function in the list.
When setting Parameters (such as when choosing between Fahrenheit or Celsius
display), pressing the RAISE or LOWER button will increment or decrement the
value. Value change occurs when button is released.
When a Function is selected (such as when starting an infiNET Acquire), pressing
either RAISE or LOWER will execute the function.
To exit from SETUP mode, press the FAN button on the CHV-TSTATRF.
CHV-TSTATRF LCD Display (SETUP Mode)
Indicates current Setup
Parameter/Function
Indicates current value for
selected Setup Parameter
NOTE: When the CHV-TSTATRF is in Setup mode the large seven-segment
displays will show the current Setup Parameter/Function. The small seven-segment
displays will show the current value for the selected Setup Parameter, if applicable,
or it will display “--” when a Function is selected. All other display elements will be
hidden (refer to “LDC Display Operation” on page 22).
18 • infiNET™ Thermostat: CHV-TSTATRF Operations & Installation Guide – DOC. 6490