User Manual

Isys i/O
®
2.8” Handheld WiFi Touchpanel Crestron TPMC-3X
Keypad Settings
From the main setup screen, touch Keypad Settings to enter the Keypad Settings
screen, with controls for keypad brightness when the TPMC-3X is docked and when
it is undocked. Lower brightness settings extend battery life. This screen also
provides a Keypad Test button, which is the same as the one described earlier. Refer
to “Diagnostics” which starts on page 22. Touch Back to return to the main setup
screen.
Keypad Settings Screen
Save & Exit
From the main setup screen, touch Save & Exit to save any setup changes you have
made and exit to normal operation mode.
General Use and Safety
WARNING: To avoid possible damage to the unit, do not use the touchpanel in the
rain or expose to unnecessary moisture.
Recommended Cleaning
Keep the surface of the touchscreen free of dirt, dust or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface, which may detrimentally affect image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. Bezels may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touchscreen. Wipe touchscreen clean and avoid getting moisture
beneath the bezels.
28 • Isys i/O
®
2.8” Handheld WiFi Touchpanel: TPMC-3X Operations Guide – DOC. 6789C