User Manual
Table Of Contents
- Isys i/O® 2.8” Handheld WiFi Touchpanel: TPMC-3X
- Introduction
- Setup
- Identity Code
- Battery Installation
- Power
- Battery Calibration
- Configuring the Touchpanel
- General Use and Safety
- Recommended Cleaning
- Programming Software
- Uploading and Upgrading
- Problem Solving
- Appendix: TBD
- Software License Agreement
- Return and Warranty Policies
Crestron TPMC-3X Isys i/O
®
2.8” Handheld WiFi Touchpanel
Touch Reset Battery Gauge to recalibrate the battery gauge. The Confirm Reset
screen will appear. Touch YES, Reset Gauge to reset the gauge or touch Back to
return to the Battery Diagnostics screen.
NOTE: The gauge should be reset after any battery replacement.
Confirm Reset Screen
Touch Recondition Battery to drain and recondition the TPMC-3X’s battery. The
Confirm Recondition screen will appear.
Confirm Recondition Screen
Touch YES, Recondition Battery to start the process. The Battery Reconditioning
screen will appear.
Operations Guide – DOC. 6789C Isys i/O
®
2.8” Handheld WiFi Touchpanel: TPMC-3X • 25