User Manual
Table Of Contents
- Isys i/O® 2.8” Handheld WiFi Touchpanel: TPMC-3X
- Introduction
- Setup
- Identity Code
- Battery Installation
- Power
- Battery Calibration
- Configuring the Touchpanel
- General Use and Safety
- Recommended Cleaning
- Programming Software
- Uploading and Upgrading
- Problem Solving
- Appendix: TBD
- Software License Agreement
- Return and Warranty Policies
Isys i/O
®
2.8” Handheld WiFi Touchpanel Crestron TPMC-3X
WiFi Diags
From the Diagnostics screen, touch WiFi Diags to enter the WiFi Diagnostics
screen, which displays SSID, BSSID, RSSI, Signal Strength, MAC Connection and IP
Addr and has indicators for WAP Connection and Control Connection. Touch Back
to return to the Diagnostics screen.
WiFi Diagnostics Screen
Battery Diags
From the Diagnostics screen, touch Battery Diags to enter the Battery Diagnostics
screen. This screen displays the battery’s state (e.g. charging), level (in percent),
amount of current remaining and amount of voltage remaining. In addition, it
contains controls to Reset Battery Gauge and Recondition Battery. Touch Back to
return to the Diagnostics screen.
NOTE: The field at the bottom of the screen is to be used when under the
supervision of a Crestron technical support representative during telephone support.
Battery Diagnostics Screen
24 • Isys i/O
®
2.8” Handheld WiFi Touchpanel: TPMC-3X Operations Guide – DOC. 6789C