User Manual
Table Of Contents
- Isys i/O® 2.8” Handheld WiFi Touchpanel: TPMC-3X
- Introduction
- Setup
- Identity Code
- Battery Installation
- Power
- Battery Calibration
- Configuring the Touchpanel
- General Use and Safety
- Recommended Cleaning
- Programming Software
- Uploading and Upgrading
- Problem Solving
- Appendix: TBD
- Software License Agreement
- Return and Warranty Policies
Crestron TPMC-3X Isys i/O
®
2.8” Handheld WiFi Touchpanel
Keypad Test
Touch Keypad Test to view the Keypad Test Screen. Pressing the corresponding
button on the TPMC-3X will cause its likeness on the screen to light up. Touch Back
to return to the Diagnostics screen.
Keypad Test Screen
Touch Test
From the Diagnostics screen, the Touch Test button takes you to a screen for
calibrating the TPMC-3X touchscreen. Touch Calibrate to begin screen calibration.
The calibration screen will show a crosshair in the center. Touch the crosshair and it
will move to another location on the screen. Continue to touch the crosshair as it
appears at each new location. When the process is finished, a ”Calibration
Complete” message will appear. Touch the screen to return to the Touch Test screen.
Then touch Return to go back to the Diagnostics screen.
Touch Test Screen
Operations Guide – DOC. 6789C Isys i/O
®
2.8” Handheld WiFi Touchpanel: TPMC-3X • 23