This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc.
Crestron ST-BTP Rechargeable Power Pack Contents High Performance Rechargeable Power Pack: ST-BTP 1 Description................................................................................................................................. 2 Handling .................................................................................................................................... 2 Storage .................................................................................................................
Crestron ST-BTP Rechargeable Power Pack High Performance Rechargeable Power Pack: ST-BTP INTERNAL FACE EXTERNAL FACE INTERNAL FACE RE CY C LE Operations Guide - DOC.
Rechargeable Power Pack Crestron ST-BTP Description The Crestron high performance rechargeable power pack, herein referred to as the ST-BTP, is designed to supply power to certain Crestron wireless touchpanel models. Installation of the ST-BTP offers the touchpanel user the freedom to roam without being confined to a stationary power source (i.e., external power pack or docking station). The table below provides a summary of leading specifications for the ST-BTP.
Crestron ST-BTP Rechargeable Power Pack NOTE: The ST-BTP contains a NiCad battery. When the unit can no longer retain a charge, it must be recycled or disposed of properly. Refer to the recycle label on the unit for disposal information. To prevent short-circuiting, use care when handling the ST-BTP. NiCad cells have extremely low internal resistance and discharge at high current levels when shorted. As a result, the high temperatures can damage the rechargeable power pack and may cause personal injury.
Rechargeable Power Pack Crestron ST-BTP ST-BTP Installed into a Touchpanel (ST-1550C) NOTE: The actual installation procedures for Crestron wireless touchpanels other than the ST-1550C and its related family members are provided in the Operations Guide of the touchpanel. NOTE: This rechargeable power pack is shipped in a discharge condition. Charge the ST-BTP in a well-ventilated area away from sparks, flames, or smoking. NOTE: The ST-BTP is a sealed power pack.
Crestron ST-BTP Rechargeable Power Pack 3. Slowly rotate ST-BTP into compartment so that external face is visable. 4. Verify proper installation with audible click of rechargeable power pack into battery compartment. Touchpanel latch secures the ST-BTP and prevents the power pack from falling out.
Rechargeable Power Pack Crestron ST-BTP Further Inquiries If after reviewing this Operations Guide for the ST-BTP, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: • In the US and Canada, call Crestron’s corporate headquarters at 1-888-CRESTRON [1-888-273-7876] or 1-201-767-3400. • In Europe, call Crestron International at +32-15-50-99-50. • In Asia, call Crestron Asia at +852-2341-2016.
Crestron ST-BTP Rechargeable Power Pack Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 5746A 03.01 Specifications subject to change without notice.
