Crestron PWE-4803RU PoE Injector Installation Guide
Crestron PWE-4803RU PoE Injector Contents PoE Injector: PWE-4803RU 1 Introduction ............................................................................................................................... 1 Specifications .............................................................................................................. 2 Physical Description.................................................................................................... 3 Industry Compliance .........................
Crestron PWE-4803RU PoE Injector PoE Injector: PWE-4803RU Introduction The PWE-4803RU is a PoE (Power over Ethernet) injector that meets IEEE 802.3af requirements. The PWE-4803RU is designed to power Crestron 802.3af powered devices such as the CEN-WAP-ABG-1G wireless access point. The PWE-4803RU can also power third-party 802.3af powered devices. NOTE: Only connect this PoE injector to a device that is 802.3af compliant. Plugging this PoE injector into a device that is not 802.
PoE Injector Crestron PWE-4803RU Specifications Crestron suggests that only this PoE injector be used with designated 802.3af-compliant Crestron products. The specifications for the PWE-4803RU are as follows. PWE-4803RU Specifications SPECIFICATION DETAILS Output Rating Power Requirements Environmental Temperature Humidity Heat Dissipation Enclosure Dimensions Height Width Depth Weight 48 VDC nominal, 0.
Crestron PWE-4803RU PoE Injector Physical Description This section provides information about the connections and the indicator available on your PWE-4803RU.
PoE Injector Crestron PWE-4803RU Connectors & Indicators (Continued) # CONNECTORS & INDICATORS DESCRIPTION 2 LAN PoE (1) 8-wire RJ-45 connector; 10BaseT/100BaseTX Power over Ethernet (PoE) port; Connects to 802.3af-compliant powered device. Maximum PoE load: 15.4 W (350 mA) @ 48 VDC nominal.* For information about pin assignments, refer to the illustration on the following page. (1) 8-wire RJ-45 connector; 10BaseT/100BaseTX Ethernet port; Connects to Ethernet LAN.
Crestron PWE-4803RU PoE Injector LAN PoE and LAN Connector Pin Assignments NOTE: In the listing of LAN PoE and LAN pins above, arrows denote internal pin connections. Industry Compliance This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc. (E300305) As of the date of manufacture, the PWE-4803RU has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling.
PoE Injector Crestron PWE-4803RU Setup Complete the following steps to properly set up and connect the PoE injector. Refer to the illustration at the conclusion of the procedure. 1. Attach the supplied AC power cord to the IEC 320 connector on the PoE injector. 2. Insert the other end of the power cord into an active AC receptacle. 3. Using a CAT5 cable, connect the LAN port of the PoE injector to the LAN. 4. Using a CAT5 cable, connect the LAN PoE port of the PoE injector to the PoE port of an 802.
Crestron PWE-4803RU PoE Injector Contact Information and Updates Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling Crestron at 1-888-CRESTRON [1-888-273-7876]. You can also log onto the online help section of the Crestron website (www.crestron.com/onlinehelp) to ask questions about Crestron products.
PoE Injector Crestron PWE-4803RU Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron PWE-4803RU PoE Injector This page is intentionally left blank. Installation Guide – DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Installation Guide – DOC. 6712A (2021742) 08.08 Specifications subject to change without notice.
