- Crestron Lightning Strike ProtectorInstallation and Operations Guide

Lightning Strike Protector Crestron CSP-LSP
that span multiple buildings, a separate CSP-LSP can be installed in each
building to protect all of the local devices within each building.
The CSP-LSP is designed for mounting to a wall or similar flat surface.
Two protected CONTROL SYSTEM ports are provided, paralleled for
easy daisy chaining to a second CSP-LSP or other Cresnet equipment.
Four paralleled DEVICE ports accommodate the connections from one
or more remote Cresnet wire runs. Two #10 ground lugs provide for
termination of the grounding cable. A three foot long braided ground
wire is included, complete with a copper saddle clamp for attachment to a
suitable utility ground, cold water pipe, or grounding rod. A bus bar is
also included for daisy chaining to a second CSP-LSP unit.
2 • Lightning Strike Protector: CSP-LSP Operations & Installation Guide – DOC. 6643A