- Crestron Electronics Digital Audio Processor With Room Control Operations Guide C2N-DAP8RC

Digital Audio Processor with Room Control Crestron C2N-DAP8RC
48 • Digital Audio Processor with Room Control: C2N-DAP8RC Operations Guide - DOC. 8187A
PRO2 System View
The System Views lower pane displays the PRO2 system tree (refer to figure below).
This tree can be expanded to display and configure the communications ports.
Expanded PRO2 System Tree
C2Net-Device Slot in Configuration Manager
To incorporate a C2N-DAP8RC into the system, drag the unit’s symbol from the
Cresnet Control Modules | Cresnet Audio Modules folder of the Device Library and
drop it in System Views. The PRO2 system tree displays the unit in Slot 9, with a
default Net ID of 50, as shown in the following illustration.
NOTE: The first C2N-DAP8RC in a system is preset with a Net ID of 50 when its
symbol is dragged into the upper pane of System Views. Additional C2N-DAP8RCs
are automatically assigned different Net ID numbers as they are added.
C2Net Device, Slot 9