Owner's manual

Crestron Adagio
®
ATC-AMFMXM AM/FM/XM Tuner Card
Tuner Card Installation
5. Push the ATC-AMFMXM card into the slot until it stops at the rear
connector, and then push again until the ATC-AMFMXM card snaps
into place.
6. Secure the card in place by tightening the two slotted screws by hand.
The screwdriver slots are provided for removal only.
7. Connect antenna(s).
8. Apply power to the Adagio system.
Regional Configuration
Once the tuner card is installed, users may change tuner configuration for North
American and European signal reception. Instructions on changing the regional
configurations for Adagio systems that feature tuner card slots can be found in their
respective guides which can be obtained from the Crestron website
(http://www.crestron.com/manuals).
Hardware Hookup
Make the necessary connections as called out in the following illustration.
Hardware Connections for the ATC-AMFMXM
FM ANT
:
CONNECT SUPPLIED OR
OUTDOOR ANTENNA
EXT. ANT IN
AM ANT
:
CONNECT THE SUPPLIED
AM ANTENNA
XM ANT
:
CONNECT
SUPPLIED XM ANTENNA
EXT . ANT OUT
Operations & Installation Guide – DOC. 6462A AM/FM/XM Tuner Card: ATC-AMFMXM • 7