Installation guide

Crestron MPC-M50 Media Presentation Controller
Specifications
Specifications for the MPC-M50 are listed in the following table.
MPC-M50 Specifications
SPECIFICATION DETAILS
Processor
CPU 32-bit Freescale ColdFire
®
Microprocessor
Memory
SDRAM 32 MB
NVRAM 256 KB
Flash 8 MB
Time Clock
Accuracy ± 1 minute per year
Operating System
Real-time, preemptive multi-
threaded/multitasking kernel; FAT32 file
system with long names; supports SIMPL™
Windows and SIMPL+
®
.
Ethernet
10/100BASE-T, auto-negotiating, full/half
duplex, static IP or DHCP, DNS, SSL,
TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-
in Web server and e-mail client; supports
Crestron e-Control2 XPanel and RoomView
applications.
IR Receiver
Reception Frequency 36 to 38 kHz IR
Formats Crestron format, RC5
Range
Up to 50 feet (15 meters) line of sight
typical, dependent upon angle,
obstructions, IR interference and IR remote
signal strength
Power Requirements
Cresnet Power Usage 10 W (0.42 A @ 24 VDC)
power supply included
Available Cresnet Power 8 W using included power supply
Default Net ID 02
Minimum 2-Series Control
System Update File
1, 2
Version 4.001.1017 or later
Environmental
Temperature 32º to 104º F (0º to 40º C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 20 BTU/Hr
Enclosure
Faceplate Plastic, black or white, with label overlay
Chassis Plastic with steel mounting plate
Mounting
Requires 3-gang plaster ring or electrical
box, ≥2.5 in (64 mm) deep recommended
(Continued on following page)
Operations & Installation Guide – DOC. 6814B Media Presentation Controller: MPC-M50 • 5