Installation guide

Crestron MPC-M50 Media Presentation Controller
Attach the MPC-M50
Screws (2) 04-40 x 1/4"
(2007156)
Label Holder
Button Labels
6. Attach the label holder by placing it over its slots and sliding it downward
into position.
7. Attach the included labels in the appropriate positions on the
MPC-M50.
8. Perform any necessary programming using the COMPUTER (USB)
connection prior to attaching the front panel of the MPC-M50.
(Programming can also be performed via the LAN port.)
9. Remove the protective coating that covers the LCD display.
10. Use the four included 04/40 x 1/2” screws and the included 1/16” Allen
wrench to attach the front panel to the MPC-M50.
Operations & Installation Guide – DOC. 6814B Media Presentation Controller: MPC-M50 • 15