Installation guide

Crestron MPC-M50 Media Presentation Controller
Supplied Hardware
The hardware supplied with the MPC-M50 is listed in the following table.
Supplied Hardware for the MPC-M50
DESCRIPTION PART NUMBER QUANTITY
Mounting Plate with Ground Wire 4506280 1
Button Identification Labels, Sources, 100 4509400 1
Button Identification Labels, Actions, 100 4509402 1
Screws, 04-40 x 1/4”, Pan, Phil 2007156 2
Screws, 06-32 x 3/4”, Combo Head 2009211 4
Screws, 04-40 x 1/2”, Btn Head
2021395 or
2021396*
4
Prod tool, 1/16” Allen Wrench, L-Key 2022867 1
* 2021395 with black models, 2021396 with white models.
Installation
The following material and tools are required for installation of an MPC-M50:
• Standard 3-gang electrical box (not included)
• Philips screwdriver
• 1/16” Allen wrench (included)
After the wiring has been installed and verified, use the following procedure to
install the MPC-M50 in a standard, 3-gang electrical box.
1. Turn system power OFF.
2. Use the four included 06-32 x 3/4” screws to attach the mounting plate to
the electrical box.
Operations & Installation Guide – DOC. 6814B Media Presentation Controller: MPC-M50 • 13