Installation guide

Crestron MPC-M50 Media Presentation Controller
Connectors, Controls & Indicators
# CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
1 LCD DISPLAY
Green LCD dot matrix, 128 x 64 resolution,
adjustable LED backlight
Supports dynamic text and icon graphics,
scrolling text, scrolling lists, Windows
®
SideShow
®
enabled
2 VOLUME
(1) Programmable continuous turn rotary
encoder for volume adjustment, navigating
menu, scrolling lists and adjusting values
3 LIGHT SENSOR
Photo sensor, programmable for
auto-dimming of front panel labeling and
other functions
4 IR RECEIVER Receives signals from IR transmitter
5 SOFT KEYS
(4) Push buttons for activation of LCD driven
functions
6
FEEDBACK
INDICATORS
(7) Programmable red LEDs (one per hard
key)
7 HARD KEYS
(7) Programmable buttons with backlit
labeling
8 HOME (1) Push button, returns to the home page
9
,
(2) Push buttons, scroll up or down through
menu and adjust menu parameters
10 ENTER
(1) Push button, executes highlighted menu
or value
11 MUTE (1) Programmable push button
12
COMPUTER
Pin 2 Pin 3
Pin 1 Pin 4
(1) USB Type B female (behind front cover)
USB 1.1 computer console port
PIN DESCRIPTION
1 +5 VDC
2 Data -
3 Data +
4 Ground
13 SW-R
(1) Recessed miniature push button (behind
front cover) for software reset (restarts the
SIMPL program)
14 HW-R
(1) Recessed miniature push button for
hardware reset (reboots the processor)
15
NET
(2) Sets of (4) captive screw terminals
Cresnet port and 24 VDC power input with
parallel pass-through
Master/Slave selectable
24: Power (24 VDC)
Y: Data
Z: Data
G: Ground
(Continued on following page)
Operations & Installation Guide – DOC. 6814B Media Presentation Controller: MPC-M50 • 9