INSTRUCTION MANUAL Patio Umbrella
BEFORE INSTALLATION Please list all parts as below first to check if any part is missing and make assembly easier. Do be careful that some parts are heavy and sharp. Please follow the assembly steps to install the product, if you find spare parts left, don't be worried, the left spare parts are prepared for bad ones if occurred. Once you hand tighten all of your bolts into place, we are going to use our wrench to fully tighten into place. Please do not exceed the bearing limitations of the product.
ASSEMBLY PARTS REQUIRED A 1 C F H B 1PC 1PC Ø8mm 8PCS E G 1PC M8X15mm 8PCS 1PC 1PC 2 ATTENTION Before inserting the "T" part through the joint, squeeze the handle by hand to make the "T" part easily pass. ! J T 1PC Please keep the pole holes towards outside.
ASSEMBLY PARTS REQUIRED M8X25 m m D 3 1PC U 4PCS ! ! Base is not included, please prepare it by yourself 4 Attention! Before opening the umbrella, please loose the umbrella top by hand in case the ribs are crossed
OPERATION 5 I 1PC 6
WARM TIPS ！ Warm Tips： If you have any problem with this product or our service, please don't hasty in writing negative review or feedback. Please welcome to contatct us right away, our service team will response within 24 hours , and we will try our best to help you. Thank you for giving us a chance to improve the product and our service. ••• ••• ••• CARE & MAINTENANCE Do not put hot items directly on furniture surface. Do not clean furniture with harsh cleansers or polish.
