INSTRUCTION MANUAL EGG CHAIR
• • • BEFORE INSTALLATION Please list all parts as below first to check if any part is missing and make assembly easier. Do be careful that some parts are heavy and sharp. • • •• Please follow the assembly steps to install the product, if you find spare parts left, don't be worried, the left spare parts are prepared for bad ones if occurred. Once you hand tighten all of your bolts into place, we are going to use our wrench to fully tighten into place.
ASSEMBLY PARTS REQUIRED D 1 D1 P TIP: Do not fully tighten hardware until all bolts have been loosely fastened. O B 1 C1 1 D1 C 1x 1x D I 1x 1x M6 K1 I C C1 ! K1 Attention! P 1x M6x45 O 4x 4x M8x25 4x M8 4x 2 Assistance may be required for this step. A J I 1x M6x20 M6 4x 4x Note: Gentle force may be required for the mounting holes of the canopy frame to align with the seat frame. Bolts install through the underside of the seat frame.
ASSEMBLY 3 PARTS REQUIRED F H G 4x K 4x 4x M6x30 4x 4 E E2 E1 1x 2x 1x
WARM TIPS ! Warm Tips: If you have any problem with this product or our service, please don't hasty in writing negative review or feedback. Please welcome to contatct us right away, our service team will response within 24 hours , and we will try our best to help you. Thank you for giving us a chance to improve the product and our service. ••• ••• ••• CARE & MAINTENANCE Do not put hot items directly on furniture surface. Do not clean furniture with harsh cleansers or polish.