Installation Instructions

33
Reversing Sliding Panel (cont.)
5. Pull the roller assembly out through the opening
in the bottom of the frame (FIGURE 5).
NOTE: Adjustment screw remains attached to the
roller assembly.
Install Roller Assembly In Top of Panel
NOTE: If present, remove cover on adjustment
and mounting screw hole (FIGURE 6).
6. Take roller assembly to top of panel. Insert roller
into frame pocket with adjustment screw up
(FIGURE 5).
7. Hold the roller assembly in place (FIGURE 7).
Fasten securely with the installation screw you
removed earlier (FIGURE 7).
8. Apply vinyl self-adhesive screw hole cover
(FIGURE 8).
FIGURE 5
FIGURE 6
FIGURE 7
FIGURE 8