Installation Instructions
31
Reversing Door Frame (cont.)
6. Carefully rotate frame (FIGURE 6) so inactive
panel is in the opposite position. It will now be on
the right side as viewed from the outside.
7. Snap sill track, sill stop and screen track into
place on the left side of the frame by reversing
steps 4 and 5 (FIGURE 7).
Improper use of hand and power tools could
result in personal injury and/or product damage.
Follow equipment manufacturers’ instructions for
safe operation. Always wear safety glasses.
VIEWED FROM EXTERIOR
6
Inactive
Panel
Inactive
Panel
Original Top
Original Top
Original Bottom
Original Bottom
FIGURE 6
FIGURE 7