Installation Instructions

Locate the handle sets in the hardware package.

When installation is complete they will look like

(FIGURES 2 or 2A ).

1. Locate the two exterior handles (FIGURE 3).

2. Locate four Phillips, flat head, long machine

screws in the hardware package (FIGURE 1).

3. Locate two escutcheon plates in the hardware

package (FIGURE 1).

Assemble Lock to Exterior Handle

NOTE: If no lock is to be installed, skip to the next

page.

4. Locate the external handle with the lock hole,

the lock cylinder and the washer-head machine

screw (FIGURE 4).

5. Insert the lock cylinder into the handle from the

underside (FIGURE 5).

6. Secure lock cylinder to underside of exterior

handle with one washer-head machine screw

(FIGURE 6). Screw must seat firmly against leg of

lock cylinder.

FIGURE 2

Viewed from the exterior.

FIGURE 3

FIGURE 4 FIGURE 5 FIGURE 6

Handle Installation – 4-Wide Door (cont.)