Installation Instructions

24
6. Locate the two 1-1/2" long, Phillips, oval head,
color-matched machine screws in the hardware
package. From the interior, insert one of these
screws into the hole on the interior handle
escutcheon plate (FIGURE 5). Align machine
screw with the tube nut inserted earlier and
thread machine screw into the tube nut. Leave
the first screw slightly loose so it will be easier to
align the second screw.
7. Insert the second machine screw from the inside
and then firmly tighten both machine screws to
secure the handle.
IMPORTANT: Be sure threads on tube
nut and machine screw align. Do not cross
thread. Do not overtighten the machine screws.
Handle Installation – 2-Wide Door (cont.)
FIGURE 5