Installation Instructions

iii
Weight of window and door unit(s) and accessories
will vary. Use a reasonable number of people with
sufficient strength to lift, carry and install window or
door unit(s) and accessories. Always consider site
conditions and use appropriate techniques when
installing.
Falling from window or door opening
may result in serious injury or death.
DO NOT leave openings unattended
when children are present.
Screen will not stop children,
any one or anything from
falling out window or door.
Keep children and objects
away from open windows or
doors.
CUT HAZARD
*May cause serious
injuries if broken.
Recognize this symbol. This is the Safety-Alert symbol. When you see this symbol be
alert to the potential for personal injury or product damage.
START PAGE
Reversing Door Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Phillips Head Screwdriver, Slotted Screwdriver
Install Lock Keeper – 2-Wide Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Phillips Head Screwdriver, Small Flat Screwdriver
OPTION INSTALLATIONS
Jamb Extension - Measuring Tape, Hacksaw, Utility Knife, Rubber Mallet, . . . . . . . . . . . . . . 37
Electric Drill with Drill & Screwdriver Bits, #7 x 1-1/4" Stainless Steel Flathead Screws,
Combination Square
Field Stacking – Adding Transom – 2-Wide Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Utility Knife, Measuring Tape, Tin Snips, Locking Pliers, Clear Silicone Sealant, Caulking Gun,
Hacksaw, Level, Drill With Drill Bits and Screwdriver Attachment, Metal Brackets, Screws,
Shop Towels, Denatured Alcohol
Mull Strips - Configuration, Measuring & Cutting, Installation – 2-Wide Only . . . . . . . . . . . . . . . 41
Measuring Tape, Hacksaw, Utility Knife, Tin Snips, Clear Silicone Sealant, Caulk Gun,
Rubber Mallet, Shop Towels, Denatured Alcohol, Universal Mull Strips
Turn Units Over – 2-Wide Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Recommended Finishing Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Products With Synthetic Stucco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Throughout these instructions DPR equals “For
Design Pressure Rating”. Any procedure so titled
must be
completed to maintain the rating validity.
Non-DPR is for installations not requiring
maintenance of design pressure ratings. In this
case you can follow procedures for either DPR or
non-DPR.
Definition:
Table of Contents and Tool/Material Requirements (cont.)