Installation Instructions

16
Pocket Replacement Window Installation Instructions
Window Installation (cont.)
8. Insulate gap between new window frame and old
frame with fiberglass insulation. Do not over pack
insulation.
Run a bead of sealant along joints where new
window and old window frames meet (FIGURE 8).
9. Use appropriate length finish nails and reinstall the
head and side inside stops (FIGURES 9 & 10).
NOTE: If the inside stops were damaged during
removal, obtain and install new pieces
(FIGURE 11).
FIGURE 8
EXTERIOR
CAULK
BEFORE
INSTALL
CAULK
AFTER
INSTALL
FIGURE 9
FIGURE 10
FIGURE 11
EXTERIOR
INTERIOR
SIDE INSIDE
STOPS (provided
by others)
INTERIOR
CASING
MOULDING