Installation Instructions

10
Pocket Replacement Window Installation Instructions
FIGURE 5
FIGURE 6
4. If windows are mulled or adjacent, check mull posts
to see if they have hollow cavities. Fill with fiber-
glass insulation and then reclose (FIGURE 5).
5. For trim that was removed and will be reused, pull
old nails through from the back to prevent damaging
the exposed face of the trim (FIGURE 6).
6. After all components are removed, insulation
applied, and all covers reattached, clean opening
with brush or shop vacuum.
NOTE: If your replacement window units are ordered
with exterior trim be sure to remove old
exterior trim before continuing. See the
next page.
Remove Old Window Interior Component
s – Wood Frame Building (cont.)