Operation Manual

ManualsBrandsCresta ManualsMiscellaneousRC380

TO SET THE ALARM 2

• Press and hold the button for 3 seconds:

• The alarm 2 hour digit will flash, then press

the button or the button to adjust to

the desired hour.

• Press the button, the alarm 2 minute

digit will flash, then press the button or the

button to adjust to the desired minute.

• Press the button to show the current

snooze period with the minute field flashes.

• Press the button or the button to adjust

to the desire snooze period from 1 minute

to 59 minutes.

• Press the button and the alarm 2 time

is set and enabled.

• If no key is pressed for 30 seconds, the clock will

resume the alarm 2 display.

• Press the MODE button and the time is set.

 If no key is pressed for 30 seconds, the clock will

 revert to normal time display.

TO SET THE LANGUAGE OF WEEKDAYS

• In normal mode, press and hold the button for 3 seconds.

• The language of the current weekdays will be displayed in the LCD :

 e.g. English (EN), German(GE), Italian(IT), French(FR), Spanish(SP).

• Press the button for 1 second to adjust to the correct language

 of weekdays.

TO SET THE FOREIGN TIME

• In normal mode, press and hold the button for 3 seconds. The clock

 will switch to foreign time with the “ F ” icon turn on.

• Press and hold the button for 3 seconds in foreign time will switch to

 normal time with the “ F ” icon turn off.

• In foreign time, press and hold the MODE button for 3 seconds to set the

 foreign time with the hour digit flashes.

• Press the button or the button to adjust to the correct hour for the

 time zone.

• Press the MODE button and the foreign time is set.

• If no key is pressed for 30 seconds, the clock will revert to foreign

 time display.

TO SET THE DAILY ALARM 1

Press and hold the button for 3 seconds:

•The alarm1 hour digit will flash, then press

 the button or the button to adjust to

 the desired hour.

•Press the button, the alarm1 minute

 digit will flash, then press the button or the

 button to adjust to the desired minute.

•Press the button to show the current

 snooze period with the minute field flashes.

•Press the button or the button to adjust

 to the desire snooze period from 1 minute

 to 59 minutes.

•Press the button and the alarm1 time

 is set and enabled.

•If no key is pressed for 30 seconds, the clock will

 resume the alarm l display.

USING THE ALARM AND SNOOZE FOR DAILY

ALARM 1 or ALARM 2

• Press the / button to turn the alarm1 on, or the alarm1 off/

 the alarm 2 on, or the alarm2 off.

• When the current time reaches the alarm time that is enabled, the

 corresponding alarm is activated.

• Press the / button when the alarm is activated will stop the

 alarm for 24 hours.

• When the alarm is activated, press the SNOOZE/LIGHT button and the

 alarm stops but sounds again after the snooze period (4 minutes snooze

 period is pre-programmed).

• The repeat alarm indicator will flash.

• The alarm will stop after 4 minutes if the / button or

 SNOOZE/LIGHT button is not pressed.

RECEIVING THE RADIO CONTROL SIGNAL

The radio-controlled clock will automatically receive the radio signal every

hour. It will take 3-5 minutes to receive the radio signal. If the DCF signal is

received, the DCF tower will be visible on the display, otherwise it will not.

TO LIGHT THE CLOCK

Press the SNOOZE/LIGHT button to light up the clock for 3 seconds.

AL1

AL2

AL1

AL2

AL1

AL2

SET