Operation Manual

15
17
16
18
BATTERY INSERTION/REPLACEMENT
The radio controlled clock uses one AA battery. When the display becomes
dim, or the battery low icon turns on, the battery replacement is required.
To install and replace the battery, please follow these steps:
1. Use your finger to press the battery cover at the center of the battery
 compartment on the rear of the case.
2. Follow the arrow mark on the battery cover to remove the cover.
3.Insert one AA size battery into the compartment as indicated by the
 polarity markings.
4.Replace the battery compartment cover.
SETTING THE TIME
• Once the battery is installed properly, all the displays on the face of the
 clock will light up briefly. The time & date will be: 1
D
1
M
WE 0:00
 and the alarm1 time will be 7:00.
• Your radio-controlled clock will begin to seek out the DCF time
 signal automatically. This takes typically between 3-5 minutes in good
 conditions. If after 5 minutes the DCF time has not been received, use the
 MODE key to set the time manually. The clock will then automatically
 attempt to receive the DCF time each hour every day. When this is
 successful, the received time will override the manually set time
TO SET THE TIME AND DATE MANUALLY
Press and hold the MODE button for 3 seconds:
•The hour digit will flash, then press the button
 or the button to adjust to the correct hour.
•Press the MODE button:
 The minute digit will flash, then press the button
 or the button to adjust to the correct minute.
•Press the MODE button:
 The year digit will flash, then press the button
 or the button to adjust to the correct year.
•Press the MODE button:
 The month digit will flash, then press the button
 or the button to adjust to the correct month.
•Press the MODE button:
 The date digit will flash, then press the button
 or the button to adjust to the correct date.
FEATURES:
• Controlled by Radio Signal (German DCF77)
• Large LCD display
• Displays Hour, Minute, Second; Month, Date, Day of Week,
 Alarm Time
• Foreign Time Setting (-9 Hour to +9 Hour)
• Summer Time Indicator
• Dual Alarm with programmable snooze period
• Independent Alarm Time Setting - Crescendo Daily Alarm1 &
 Single Alarm 2
• 12 Hour or 24 Hour Display Format Selectable
• Weekday Indication in 5 Languages
• battery Low Indicator
• Backlight function
• Single Battery (1.5V) Operation
PM
F
D
PM
AM
AM
M
Y
S
AL1
1
2
PM
F
D
PM
AM
AM
M
Y
S
AL1
1
2
PM
F
D
PM
AM
AM
M
Y
S
AL1
1
2
PM
F
D
PM
AM
AM
M
Y
S
AL1
1
2
PM
F
D
PM
AM
AM
M
Y
S
AL1
1
2
FUNCTION KEYS
Your radio-controlled clock has 6 easy to use function keys that control
operation:
MODE
 • To view alarm1 time or alarm2 time
 • To set the time manually
 • To set the foreign time manually.
 • To increase the hour, minute, year, month, date during time setting
 • To switch between 12 hour display format and 24 hour display format.
 • To switch between the local time and foreign time

 • To decrease the hour, minute, year, month, date, during time setting
 • To select the language of day of week.
SET
 • To set the daily alarm1
 • To turn on or turn off the daily alarm1
SET
 • To set the daily alarm2
 • To turn on or turn off the daily alarm2
SNOOZE/LIGHT
 • To turn on the backlight
 • To switch to snooze mode when the alarm is activated
2
1
Repeat Alarm Indicator
Radio Reception Icon
Battery Low Indicator
Foreign Time Indicator
Daily Alarm1 Enable Indicator
Daily Alarm1 Indicator
Weekday Display
Month Display
Date Display
Time Display
Alarm Time
Summer Time Indicator
Z
Z
D
M
S
AL1
AL2
1
2
F