Installation Guide

Step 2: Attach Mounting Arms to TV
1. Using a second person for assistance, lay your TV face down on something soft so as not to scratch the TV screen.
2. Check the back of your TV to find the appropriate mounting pattern.
3. Sort through the provided bolts (F to K) until you find the correct size that easily fits into the back of your TV and fits snugly
(the bolt must turn at least 3 full turns, do not tighten). If you feel resistance stop immediately and select a smaller bolt.
Once you have selected the correct bolt size, use the multi-sized washer (C). If no bolts fit you will need to go to your local
hardware supplier to find the correct bolt and washer sizes.
4. Gently put your mounting arms (M and N) on the back of the TV so that the mounting pattern holes are showing through
the holes of the mounting arms (see Figure 3).
If the back of your TV is curved or recessed you will also need to use a spacer (D) depending upon the amount of space
you are trying to clear. If using a spacer you will also need to use longer screws. Remember that the bolt needs to turn at
least 3 full turns.
5. Using the correct mounting bolt size and length, insert these through the corresponding hole on the multi-sized washer (C)
to attach mounting arms to the rear of the TV (see Figure 3). To avoid damaging TV, do not over tighten bolts.
The Crest Company is not responsible for any damage caused by screwing the bolt too far into the back of the TV.
6. Loosen the Safety bolt at the bottom of each arm (see Figure 4).
Figure 3 Figure 4
TV
Safety
bolt
Wall
TV
F/G/H/I/J/K
D
C
Step 3: Hook Arms over Wall Plate
1. Using a second person for assistance, carefully lift the TV and hook arms over the wall plate (see Figure 5).
2. Tighten the Safety bolts at the bottom of the mounting arms with a long neck Phillips head screwdriver.
This will help ensure that your TV does not fall off your wall plate during use.
3. You may now adjust the angle of your TV for the best viewing angle. Use the Tilt adjusting bolt to adjust your
TV to the desired angle between -10˚ and 0˚ (see Figure 5).
Wall
TV
Tilt
adjusting
bolt
Figure 5
Check your TV Wall Mount is secure and safe to use at regular intervals (at least every three months).